
  ----------------------------------------------------------------------------------------------------
 05)	( 4, 2)   0.815157802391803 +  0.712418803346697 i 1e-07
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>>ERROR: intersect_with_halfspaces fails in try_this_alpha.
^^>>ERROR: topological round off errors in pare_mated_face and try_this_alpha.
^^>>ERROR: pare_face failed.
^^>> ERROR: within compute_normal_to_Dirichlet_plane, max_abs < epsilon, which should never happen.
^^>> slice_with_hyperplane fails.
^^>> failure cutting.
^^>>ERROR: slicing polyhedron fails.
^^>>ERROR: initial_polyhedron() returns NULL.
>>ERROR: compute_Dirichlet_domain returned NULL.  |gen: F  pared: F  faces: F  cycle: F  finite: F  |dev:  -         base:[ 0.02, 0.02, 0.01]>>0.00  #fve:  /  /         
 05)	( 4, 2)   0.815157802391803 + -0.712418803346697 i 1e-07
^^>>ERROR: corruption by round off errors in pare_mateless_face.
^^>>ERROR: face wasn't pared, when it should have been
^^>>ERROR: pare_face failed.
^^>> ERROR: within compute_normal_to_Dirichlet_plane, max_abs < epsilon, which should never happen.
^^>> slice_with_hyperplane fails.
^^>> failure cutting.
^^>>ERROR: slicing polyhedron fails.
^^>>ERROR: initial_polyhedron() returns NULL.
>>ERROR: compute_Dirichlet_domain returned NULL.  |gen: F  pared: F  faces: F  cycle: F  finite: F  |dev:  -         base:[ 0.02, 0.02, 0.01]>>0.00  #fve:  /  /         
 05)	( 4, 2)  -2.815157802391803 +  0.712418803346697 i 1e-07
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>>ERROR: intersect_with_halfspaces fails in try_this_alpha.
^^>>ERROR: topological round off errors in pare_mated_face and try_this_alpha.
^^>>ERROR: pare_face failed.
^^>> ERROR: within compute_normal_to_Dirichlet_plane, max_abs < epsilon, which should never happen.
^^>> slice_with_hyperplane fails.
^^>> failure cutting.
^^>>ERROR: slicing polyhedron fails.
^^>>ERROR: initial_polyhedron() returns NULL.
>>ERROR: compute_Dirichlet_domain returned NULL.  |gen: F  pared: F  faces: F  cycle: F  finite: F  |dev:  -         base:[ 0.02, 0.02, 0.01]>>0.00  #fve:  /  /         
 05)	( 4, 2)  -2.815157802391803 + -0.712418803346697 i 1e-07
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>>ERROR: intersect_with_halfspaces fails in try_this_alpha.
^^>>ERROR: topological round off errors in pare_mated_face and try_this_alpha.
^^>>ERROR: pare_face failed.
^^>> ERROR: within compute_normal_to_Dirichlet_plane, max_abs < epsilon, which should never happen.
^^>> slice_with_hyperplane fails.
^^>> failure cutting.
^^>>ERROR: slicing polyhedron fails.
^^>>ERROR: initial_polyhedron() returns NULL.
>>ERROR: compute_Dirichlet_domain returned NULL.  |gen: F  pared: F  faces: F  cycle: F  finite: F  |dev:  -         base:[ 0.02, 0.02, 0.01]>>0.00  #fve:  /  /         
 05)	( 2, 4)   0.815157802391803 +  0.712418803346697 i 1e-07
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>>ERROR: intersect_with_halfspaces fails in try_this_alpha.
^^>>ERROR: topological round off errors in pare_mated_face and try_this_alpha.
^^>>ERROR: pare_face failed.
^^>> ERROR: within compute_normal_to_Dirichlet_plane, max_abs < epsilon, which should never happen.
^^>> slice_with_hyperplane fails.
^^>> failure cutting.
^^>>ERROR: slicing polyhedron fails.
^^>>ERROR: initial_polyhedron() returns NULL.
>>ERROR: compute_Dirichlet_domain returned NULL.  |gen: F  pared: F  faces: F  cycle: F  finite: F  |dev:  -         base:[ 0.02, 0.02, 0.01]>>0.00  #fve:  /  /         
 05)	( 2, 4)   0.815157802391803 + -0.712418803346697 i 1e-07
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>>ERROR: intersect_with_halfspaces fails in try_this_alpha.
^^>>ERROR: topological round off errors in pare_mated_face and try_this_alpha.
^^>>ERROR: pare_face failed.
^^>> ERROR: within compute_normal_to_Dirichlet_plane, max_abs < epsilon, which should never happen.
^^>> slice_with_hyperplane fails.
^^>> failure cutting.
^^>>ERROR: slicing polyhedron fails.
^^>>ERROR: initial_polyhedron() returns NULL.
>>ERROR: compute_Dirichlet_domain returned NULL.  |gen: F  pared: F  faces: F  cycle: F  finite: F  |dev:  -         base:[ 0.02, 0.02, 0.01]>>0.00  #fve:  /  /         
 05)	( 2, 4)  -2.815157802391803 +  0.712418803346697 i 1e-07
^^>>ERROR: Roundoff errors in cut_face_if_necessary.
^^>> slice_with_hyperplane fails.
^^>>ERROR: intersect_with_halfspaces fails in try_this_alpha.
^^>>ERROR: topological round off errors in pare_mated_face and try_this_alpha.
^^>>ERROR: pare_face failed.
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>> failure cutting.
^^>>ERROR: slicing polyhedron fails.
^^>>ERROR: initial_polyhedron() returns NULL.
>>ERROR: compute_Dirichlet_domain returned NULL.  |gen: F  pared: F  faces: F  cycle: F  finite: F  |dev:  -         base:[ 0.02, 0.02, 0.01]>>0.00  #fve:  /  /         
 05)	( 2, 4)  -2.815157802391803 + -0.712418803346697 i 1e-07
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>>ERROR: intersect_with_halfspaces fails in try_this_alpha.
^^>>ERROR: topological round off errors in pare_mated_face and try_this_alpha.
^^>>ERROR: pare_face failed.
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>> failure cutting.
^^>>ERROR: slicing polyhedron fails.
^^>>ERROR: initial_polyhedron() returns NULL.
>>ERROR: compute_Dirichlet_domain returned NULL.  |gen: F  pared: F  faces: F  cycle: F  finite: F  |dev:  -         base:[ 0.02, 0.02, 0.01]>>0.00  #fve:  /  /         
  ----------------------------------------------------------------------------------------------------
 06)	( 4, 2)   0.581529360457850 +  0.939156034693663 i 1e-07
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>>ERROR: intersect_with_halfspaces fails in try_this_alpha.
^^>>ERROR: topological round off errors in pare_mated_face and try_this_alpha.
^^>>ERROR: pare_face failed.
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>> failure cutting.
^^>>ERROR: slicing polyhedron fails.
^^>>ERROR: initial_polyhedron() returns NULL.
>>ERROR: compute_Dirichlet_domain returned NULL.  |gen: F  pared: F  faces: F  cycle: F  finite: F  |dev:  -         base:[ 0.02, 0.02, 0.01]>>0.00  #fve:  /  /         
 06)	( 4, 2)   0.581529360457850 + -0.939156034693663 i 1e-07
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>>ERROR: intersect_with_halfspaces fails in try_this_alpha.
^^>>ERROR: topological round off errors in pare_mated_face and try_this_alpha.
^^>>ERROR: pare_face failed.
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>> failure cutting.
^^>>ERROR: slicing polyhedron fails.
^^>>ERROR: initial_polyhedron() returns NULL.
>>ERROR: compute_Dirichlet_domain returned NULL.  |gen: F  pared: F  faces: F  cycle: F  finite: F  |dev:  -         base:[ 0.02, 0.02, 0.01]>>0.00  #fve:  /  /         
 06)	( 4, 2)  -2.581529360457850 +  0.939156034693663 i 1e-07
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>>ERROR: intersect_with_halfspaces fails in try_this_alpha.
^^>>ERROR: topological round off errors in pare_mated_face and try_this_alpha.
^^>>ERROR: pare_face failed.
^^>> ERROR: within compute_normal_to_Dirichlet_plane, max_abs < epsilon, which should never happen.
^^>> slice_with_hyperplane fails.
^^>> failure cutting.
^^>>ERROR: slicing polyhedron fails.
^^>>ERROR: initial_polyhedron() returns NULL.
>>ERROR: compute_Dirichlet_domain returned NULL.  |gen: F  pared: F  faces: F  cycle: F  finite: F  |dev:  -         base:[ 0.02, 0.02, 0.01]>>0.00  #fve:  /  /         
 06)	( 4, 2)  -2.581529360457850 + -0.939156034693663 i 1e-07
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>>ERROR: intersect_with_halfspaces fails in try_this_alpha.
^^>>ERROR: topological round off errors in pare_mated_face and try_this_alpha.
^^>>ERROR: pare_face failed.
^^>> ERROR: within compute_normal_to_Dirichlet_plane, max_abs < epsilon, which should never happen.
^^>> slice_with_hyperplane fails.
^^>> failure cutting.
^^>>ERROR: slicing polyhedron fails.
^^>>ERROR: initial_polyhedron() returns NULL.
>>ERROR: compute_Dirichlet_domain returned NULL.  |gen: F  pared: F  faces: F  cycle: F  finite: F  |dev:  -         base:[ 0.02, 0.02, 0.01]>>0.00  #fve:  /  /         
 06)	( 2, 4)   0.581529360457850 +  0.939156034693663 i 1e-07
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>>ERROR: intersect_with_halfspaces fails in try_this_alpha.
^^>>ERROR: topological round off errors in pare_mated_face and try_this_alpha.
^^>>ERROR: pare_face failed.
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>> failure cutting.
^^>>ERROR: slicing polyhedron fails.
^^>>ERROR: initial_polyhedron() returns NULL.
>>ERROR: compute_Dirichlet_domain returned NULL.  |gen: F  pared: F  faces: F  cycle: F  finite: F  |dev:  -         base:[ 0.02, 0.02, 0.01]>>0.00  #fve:  /  /         
 06)	( 2, 4)   0.581529360457850 + -0.939156034693663 i 1e-07
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>>ERROR: intersect_with_halfspaces fails in try_this_alpha.
^^>>ERROR: topological round off errors in pare_mated_face and try_this_alpha.
^^>>ERROR: pare_face failed.
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>> failure cutting.
^^>>ERROR: slicing polyhedron fails.
^^>>ERROR: initial_polyhedron() returns NULL.
>>ERROR: compute_Dirichlet_domain returned NULL.  |gen: F  pared: F  faces: F  cycle: F  finite: F  |dev:  -         base:[ 0.02, 0.02, 0.01]>>0.00  #fve:  /  /         
 06)	( 2, 4)  -2.581529360457850 +  0.939156034693663 i 1e-07
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>>ERROR: intersect_with_halfspaces fails in try_this_alpha.
^^>>ERROR: topological round off errors in pare_mated_face and try_this_alpha.
^^>>ERROR: pare_face failed.
^^>> ERROR: within compute_normal_to_Dirichlet_plane, max_abs < epsilon, which should never happen.
^^>> slice_with_hyperplane fails.
^^>> failure cutting.
^^>>ERROR: slicing polyhedron fails.
^^>>ERROR: initial_polyhedron() returns NULL.
>>ERROR: compute_Dirichlet_domain returned NULL.  |gen: F  pared: F  faces: F  cycle: F  finite: F  |dev:  -         base:[ 0.02, 0.02, 0.01]>>0.00  #fve:  /  /         
 06)	( 2, 4)  -2.581529360457850 + -0.939156034693663 i 1e-07
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>>ERROR: intersect_with_halfspaces fails in try_this_alpha.
^^>>ERROR: topological round off errors in pare_mated_face and try_this_alpha.
^^>>ERROR: pare_face failed.
^^>> ERROR: within compute_normal_to_Dirichlet_plane, max_abs < epsilon, which should never happen.
^^>> slice_with_hyperplane fails.
^^>> failure cutting.
^^>>ERROR: slicing polyhedron fails.
^^>>ERROR: initial_polyhedron() returns NULL.
>>ERROR: compute_Dirichlet_domain returned NULL.  |gen: F  pared: F  faces: F  cycle: F  finite: F  |dev:  -         base:[ 0.02, 0.02, 0.01]>>0.00  #fve:  /  /         
  ----------------------------------------------------------------------------------------------------
 07)	( 4, 2)  -0.303676609148679 +  1.435949864109956 i 1e-07
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>>ERROR: intersect_with_halfspaces fails in try_this_alpha.
^^>>ERROR: topological round off errors in pare_mated_face and try_this_alpha.
^^>>ERROR: pare_face failed.
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>> failure cutting.
^^>>ERROR: slicing polyhedron fails.
^^>>ERROR: initial_polyhedron() returns NULL.
>>ERROR: compute_Dirichlet_domain returned NULL.  |gen: F  pared: F  faces: F  cycle: F  finite: F  |dev:  -         base:[ 0.02, 0.02, 0.01]>>0.00  #fve:  /  /         
 07)	( 4, 2)  -0.303676609148679 + -1.435949864109956 i 1e-07
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>>ERROR: intersect_with_halfspaces fails in try_this_alpha.
^^>>ERROR: topological round off errors in pare_mated_face and try_this_alpha.
^^>>ERROR: pare_face failed.
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>> failure cutting.
^^>>ERROR: slicing polyhedron fails.
^^>>ERROR: initial_polyhedron() returns NULL.
>>ERROR: compute_Dirichlet_domain returned NULL.  |gen: F  pared: F  faces: F  cycle: F  finite: F  |dev:  -         base:[ 0.02, 0.02, 0.01]>>0.00  #fve:  /  /         
 07)	( 4, 2)  -1.696323390851320 +  1.435949864109956 i 1e-07
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>>ERROR: intersect_with_halfspaces fails in try_this_alpha.
^^>>ERROR: topological round off errors in pare_mated_face and try_this_alpha.
^^>>ERROR: pare_face failed.
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>> failure cutting.
^^>>ERROR: slicing polyhedron fails.
^^>>ERROR: initial_polyhedron() returns NULL.
>>ERROR: compute_Dirichlet_domain returned NULL.  |gen: F  pared: F  faces: F  cycle: F  finite: F  |dev:  -         base:[ 0.02, 0.02, 0.01]>>0.00  #fve:  /  /         
 07)	( 4, 2)  -1.696323390851320 + -1.435949864109956 i 1e-07
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>>ERROR: intersect_with_halfspaces fails in try_this_alpha.
^^>>ERROR: topological round off errors in pare_mated_face and try_this_alpha.
^^>>ERROR: pare_face failed.
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>> failure cutting.
^^>>ERROR: slicing polyhedron fails.
^^>>ERROR: initial_polyhedron() returns NULL.
>>ERROR: compute_Dirichlet_domain returned NULL.  |gen: F  pared: F  faces: F  cycle: F  finite: F  |dev:  -         base:[ 0.02, 0.02, 0.01]>>0.00  #fve:  /  /         
 07)	( 2, 4)  -0.303676609148679 +  1.435949864109956 i 1e-07
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>>ERROR: intersect_with_halfspaces fails in try_this_alpha.
^^>>ERROR: topological round off errors in pare_mated_face and try_this_alpha.
^^>>ERROR: pare_face failed.
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>> failure cutting.
^^>>ERROR: slicing polyhedron fails.
^^>>ERROR: initial_polyhedron() returns NULL.
>>ERROR: compute_Dirichlet_domain returned NULL.  |gen: F  pared: F  faces: F  cycle: F  finite: F  |dev:  -         base:[ 0.02, 0.02, 0.01]>>0.00  #fve:  /  /         
 07)	( 2, 4)  -0.303676609148679 + -1.435949864109956 i 1e-07
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>>ERROR: intersect_with_halfspaces fails in try_this_alpha.
^^>>ERROR: topological round off errors in pare_mated_face and try_this_alpha.
^^>>ERROR: pare_face failed.
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>> failure cutting.
^^>>ERROR: slicing polyhedron fails.
^^>>ERROR: initial_polyhedron() returns NULL.
>>ERROR: compute_Dirichlet_domain returned NULL.  |gen: F  pared: F  faces: F  cycle: F  finite: F  |dev:  -         base:[ 0.02, 0.02, 0.01]>>0.00  #fve:  /  /         
 07)	( 2, 4)  -1.696323390851320 +  1.435949864109956 i 1e-07
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>>ERROR: intersect_with_halfspaces fails in try_this_alpha.
^^>>ERROR: topological round off errors in pare_mated_face and try_this_alpha.
^^>>ERROR: pare_face failed.
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>> failure cutting.
^^>>ERROR: slicing polyhedron fails.
^^>>ERROR: initial_polyhedron() returns NULL.
>>ERROR: compute_Dirichlet_domain returned NULL.  |gen: F  pared: F  faces: F  cycle: F  finite: F  |dev:  -         base:[ 0.02, 0.02, 0.01]>>0.00  #fve:  /  /         
 07)	( 2, 4)  -1.696323390851320 + -1.435949864109956 i 1e-07
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>>ERROR: intersect_with_halfspaces fails in try_this_alpha.
^^>>ERROR: topological round off errors in pare_mated_face and try_this_alpha.
^^>>ERROR: pare_face failed.
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>> failure cutting.
^^>>ERROR: slicing polyhedron fails.
^^>>ERROR: initial_polyhedron() returns NULL.
>>ERROR: compute_Dirichlet_domain returned NULL.  |gen: F  pared: F  faces: F  cycle: F  finite: F  |dev:  -         base:[ 0.02, 0.02, 0.01]>>0.00  #fve:  /  /         
  ----------------------------------------------------------------------------------------------------
 08)	( 4, 2)  -0.828352852975573 +  1.576686092327405 i 1e-07
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>>ERROR: intersect_with_halfspaces fails in try_this_alpha.
^^>>ERROR: topological round off errors in pare_mated_face and try_this_alpha.
^^>>ERROR: pare_face failed.
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>> failure cutting.
^^>>ERROR: slicing polyhedron fails.
^^>>ERROR: initial_polyhedron() returns NULL.
>>ERROR: compute_Dirichlet_domain returned NULL.  |gen: F  pared: F  faces: F  cycle: F  finite: F  |dev:  -         base:[ 0.02, 0.02, 0.01]>>0.00  #fve:  /  /         
 08)	( 4, 2)  -0.828352852975573 + -1.576686092327405 i 1e-07
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>>ERROR: intersect_with_halfspaces fails in try_this_alpha.
^^>>ERROR: topological round off errors in pare_mated_face and try_this_alpha.
^^>>ERROR: pare_face failed.
^^>> ERROR: within compute_normal_to_Dirichlet_plane, max_abs < epsilon, which should never happen.
^^>> slice_with_hyperplane fails.
^^>> failure cutting.
^^>>ERROR: slicing polyhedron fails.
^^>>ERROR: initial_polyhedron() returns NULL.
>>ERROR: compute_Dirichlet_domain returned NULL.  |gen: F  pared: F  faces: F  cycle: F  finite: F  |dev:  -         base:[ 0.02, 0.02, 0.01]>>0.00  #fve:  /  /         
 08)	( 4, 2)  -1.171647147024426 +  1.576686092327405 i 1e-07
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>>ERROR: intersect_with_halfspaces fails in try_this_alpha.
^^>>ERROR: topological round off errors in pare_mated_face and try_this_alpha.
^^>>ERROR: pare_face failed.
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>> failure cutting.
^^>>ERROR: slicing polyhedron fails.
^^>>ERROR: initial_polyhedron() returns NULL.
>>ERROR: compute_Dirichlet_domain returned NULL.  |gen: F  pared: F  faces: F  cycle: F  finite: F  |dev:  -         base:[ 0.02, 0.02, 0.01]>>0.00  #fve:  /  /         
 08)	( 4, 2)  -1.171647147024426 + -1.576686092327405 i 1e-07
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>>ERROR: intersect_with_halfspaces fails in try_this_alpha.
^^>>ERROR: topological round off errors in pare_mated_face and try_this_alpha.
^^>>ERROR: pare_face failed.
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>> failure cutting.
^^>>ERROR: slicing polyhedron fails.
^^>>ERROR: initial_polyhedron() returns NULL.
>>ERROR: compute_Dirichlet_domain returned NULL.  |gen: F  pared: F  faces: F  cycle: F  finite: F  |dev:  -         base:[ 0.02, 0.02, 0.01]>>0.00  #fve:  /  /         
 08)	( 2, 4)  -0.828352852975573 +  1.576686092327405 i 1e-07
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>>ERROR: intersect_with_halfspaces fails in try_this_alpha.
^^>>ERROR: topological round off errors in pare_mated_face and try_this_alpha.
^^>>ERROR: pare_face failed.
^^>> ERROR: within compute_normal_to_Dirichlet_plane, max_abs < epsilon, which should never happen.
^^>> slice_with_hyperplane fails.
^^>> failure cutting.
^^>>ERROR: slicing polyhedron fails.
^^>>ERROR: initial_polyhedron() returns NULL.
>>ERROR: compute_Dirichlet_domain returned NULL.  |gen: F  pared: F  faces: F  cycle: F  finite: F  |dev:  -         base:[ 0.02, 0.02, 0.01]>>0.00  #fve:  /  /         
 08)	( 2, 4)  -0.828352852975573 + -1.576686092327405 i 1e-07
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>>ERROR: intersect_with_halfspaces fails in try_this_alpha.
^^>>ERROR: topological round off errors in pare_mated_face and try_this_alpha.
^^>>ERROR: pare_face failed.
^^>> ERROR: within compute_normal_to_Dirichlet_plane, max_abs < epsilon, which should never happen.
^^>> slice_with_hyperplane fails.
^^>> failure cutting.
^^>>ERROR: slicing polyhedron fails.
^^>>ERROR: initial_polyhedron() returns NULL.
>>ERROR: compute_Dirichlet_domain returned NULL.  |gen: F  pared: F  faces: F  cycle: F  finite: F  |dev:  -         base:[ 0.02, 0.02, 0.01]>>0.00  #fve:  /  /         
 08)	( 2, 4)  -1.171647147024426 +  1.576686092327405 i 1e-07
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>>ERROR: intersect_with_halfspaces fails in try_this_alpha.
^^>>ERROR: topological round off errors in pare_mated_face and try_this_alpha.
^^>>ERROR: pare_face failed.
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>> failure cutting.
^^>>ERROR: slicing polyhedron fails.
^^>>ERROR: initial_polyhedron() returns NULL.
>>ERROR: compute_Dirichlet_domain returned NULL.  |gen: F  pared: F  faces: F  cycle: F  finite: F  |dev:  -         base:[ 0.02, 0.02, 0.01]>>0.00  #fve:  /  /         
 08)	( 2, 4)  -1.171647147024426 + -1.576686092327405 i 1e-07
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>>ERROR: intersect_with_halfspaces fails in try_this_alpha.
^^>>ERROR: topological round off errors in pare_mated_face and try_this_alpha.
^^>>ERROR: pare_face failed.
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>> failure cutting.
^^>>ERROR: slicing polyhedron fails.
^^>>ERROR: initial_polyhedron() returns NULL.
>>ERROR: compute_Dirichlet_domain returned NULL.  |gen: F  pared: F  faces: F  cycle: F  finite: F  |dev:  -         base:[ 0.02, 0.02, 0.01]>>0.00  #fve:  /  /         
  ----------------------------------------------------------------------------------------------------
 10)	( 4, 2)  -1.000000000000000 +  1.732050807568877 i 1e-07
^^>>ERROR: maximise injectivity radius has hit allowed limit.
 Error: checking cycle condition
 ^^>>order_lf: 0
 ^^>> possible infinite edge?  |gen: T  pared: T  faces: T  cycle: F  finite: F  |dev: 4.24E-014  base:[ 0.32, 0.98,-0.01]>>1.06  #fve:16/12/28 |Free?	 >> exited after cutting stopped in loop.
 10)	( 4, 2)  -1.000000000000000 + -1.732050807568877 i 1e-07
^^>>ERROR: maximise injectivity radius has hit allowed limit.
 Error: checking cycle condition
 ^^>>order_lf: 0
 ^^>> possible infinite edge?  |gen: T  pared: T  faces: T  cycle: F  finite: F  |dev: 2.43E-014  base:[ 0.65, 0.66, 0.04]>>0.85  #fve:16/12/28 |Free?	 >> exited after cutting stopped in loop.
 10)	( 2, 4)  -1.000000000000000 +  1.732050807568877 i 1e-07
^^>>ERROR: maximise injectivity radius has hit allowed limit.
 Error: checking cycle condition
 ^^>>order_lf: 0
 ^^>> possible infinite edge?  |gen: T  pared: T  faces: T  cycle: F  finite: F  |dev: 5.86E-014  base:[ 0.13, 0.32, 0.95]>>1.01  #fve:16/15/31 |Free?	 >> exited after cutting stopped in loop.
 10)	( 2, 4)  -1.000000000000000 + -1.732050807568877 i 1e-07
^^>>ERROR: maximise injectivity radius has hit allowed limit.
 Error: checking cycle condition
 ^^>>order_lf: 0
 ^^>> possible infinite edge?  |gen: T  pared: T  faces: T  cycle: F  finite: F  |dev: 5.72E-014  base:[ 0.79, 0.35, 0.55]>>1.05  #fve:18/18/36 |Free?	 >> exited after cutting stopped in loop.
  ------------------------------------------------

 and we're done